FIELD CONTROLS Hardware platform 10 Manual do Utilizador descarregar pdf (Página 20)

Hardware Platform 10 Installation Guide

For ELS controllers:

Assigning an IP address on an ELS controller

The IP address on an ELS controller is defined in a configuration file and set to 10.0.0.1

by default.

To change this IP address, connect to the ELS using an USB keyboard, SSH or the serial

console. Then log in using username / password (default els / elsroot) and edit the file

/etc/network/interfaces

DHCP:

auto eth*

iface eth* inet dhcp

Fixed IP (10.0.0.1):

auto eth*

iface eth* inet static

address 10.0.0.1

gateway 127.0.0.1

netmask 255.0.0.0

network 10.0.0.0

broadcast 10.0.0.255

The ELS must be rebooted for the changes to take affect.

1 2 ... 15 16 17 18 19 20 21 22

Sem comentários

FIELD CONTROLS Hardware platform 10 Manual do Utilizador Página 20